Tech Dungeon 
Small USB Joystick

This archive contains the firmware, configuration backup, and reference
screenshots used for the Tech Dungeon Small USB Joystick.

## FILES

	small-joystick-v1.0.0.gp2040

		GP2040-CE configuration backup containing the settings used by
		Tech Dungeon.

		This file can be restored through the GP2040-CE web configuration
		interface.

		NOTE: Restoring this backup will overwrite the current GP2040-CE
		configuration on the joystick.


	GP2040-CE_0.7.12_WaveShareZero.uf2

		GP2040-CE firmware used to program the RP2040/Waveshare Zero board.

		GP2040-CE is an open-source controller firmware project. For additional
		information, documentation, and source code, visit:

		https://gp2040-ce.info/

## REFERENCE IMAGES

	The following PNG files are screenshots of the settings used by the
	joystick. They are provided as a reference for the pertinent
	sections of the GP2040-CE web configuration interface.

		gamepad-settings.png
			Recommended gamepad settings page

		hotkey-settings.png
			Hotkey configuration.

		input-mode-settings.png
			Input mode configuration.
		
		gpio-profile-settings.png
			Profile 1 default settings
		
		peripheral-mapping.png
			Settings to activate lines for the built in display
		
		display-settings.png
			peripheral-mapping-settings.png
		
		boot-input-mode.png
			Settings for boot input hot keys to switch modes

## SUPPORT

	If you have any questions or need assistance with these files or the
	joystick, please contact Tech Dungeon:

	help@techdungeon.xyz
